1000W LED Flood Lights

1000W LED vs 1000W Equivalent?

We have struggled to grasp this concept. So, here is a brief explanation of what 1000W equivalence means and what not.

Until a few decades ago, wattage was a reliable way to pick your bulbs. But, halogen and LED lights changed that. In fact, the later models were more energy efficient. So, a 1000 watt LED light emits more light than a 1000 watt metal halide.

Soon, manufacturers started comparing the new models to old ones as a marketing tactic. So, when you read about a 1000W equivalent replacement, the product label or ad is telling you that the light is more energy-saving. But it is not revealing its actual wattage, which is actually lower.

A more sensible way to make your mind about the fixture’s brightness is to use lumens. After all, the lumen is the unit of measure of light intensity. The more lumens, the brighter the light.

Feature of this 1000W LED stadium lights

1. Illuminate the dark side of the Moon

In a few words, it is very bright. This stadium light emits a whopping 170,000 lumens. In short, you can illuminate a whole backyard with just one fitting at the right height.

Such a powerful lighting solution can emphasize your business building. By itself, it can illuminate a tennis court for training. But you would only need anywhere between two and four fixtures to completely light up the pitch for professional events. You could also use some portable lighting solutions to balance out what this LED sports light provides.

2. Energy-saving LED chips

Each chip averages 170 lumens per watt. On balance, most stadium light chips range between 100 and 200 lumens. So, this fixture position itself among the best-performing ones.

For its price, it is really a steal. Of course, the lumen per watt ratio suggests that the big output can replace HPS and HID lights.

With cheaper models, you might not get so lucky. Most cheap LED flood lights have a big lumen output but a large beam angle too. With this product, you just need a tall high mast. Or to install it high enough.

3. Designed for sports arena and stadium

To repeat, this 1000W stadium light gives you:

• 170,000 lumens
• a wide range of degrees beam angle to provide good coverage

Plus, a mounting bracket that allows you to adjust the tilting up to 180 degrees for the best results.

As soon as I got this LED light, I found it to be perfectly thin. It is just 3.54 inches thick and easy to pack in your car or van.

All in all, it combines the design of a LED panel with the functionality of a spot light. You can use it for football fields, cricket ovals, and any turf playground.

4. Work under extreme temperatures and conditions

Given its IP67 rating and anti-corrosion casing, this light can endure high and low temperature and vibrations. The 7 in the IP rating actually explains that it is not only waterproof, but it can resist direct water jets.

You can mount this light near a bunker on a golf course. In fact, no solid dust particle can enter the insulated shell. So, it is an ideal product for beach volley courts and dressage arenas as well.

Finally, the thermal conductivity of 236W/mK for superior heat dissipation completes the picture.

5. 2700W to 6500W metal halide replacement

If you are completely baffled by the previous specs, here is a more understandable comparison.

You can buy and install this 1000W fixture to replace a 3500-5000W MH lamp. At the same time, you get an LED light that is 5000 K or daytime.

The color temperature (5000K) is important because it gives a more natural look to the athletes on the field. More importantly, they can focus better. Plus, daylight quality is better for televised or recorded events.

Lastly, the focused beam of this product helps you eliminate any spill light issue. You just need to tilt the panel to avoid any glare.

6. Long-lasting design

With a service life of more than 150,000 hours, you can count on this product to light up countless sports events. Plus, you get a 5-year warranty.

All throughout its life cycle, you can expect enough volumetric light for optimal uniformity. The luminance decay time estimation puts the lumen depreciation on the far end of the life span spectrum. In short, you will enjoy its super bright light flux for a long time.

Testimonials